Part Number Hot Search : 
X24C45 MUR1560G 62C256 87XS28 A1103 E005652 09U10 M54512L
Product Description
Full Text Search
 

To Download TMPS05-103 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  page 1 of 3 models the tmps-05 series comprises ultra compact ac/dc power supply modules in lightweight fully encapsulated plastic casing for pcb mount. beside the safety approvals for industrial and it solutions, they are also certifed to en 60335 for household appliance. these 5 watt modules are the ideal solution for low power or segregated circuits when space is critical or for an effcient powering of a standby mode when compliance to erp directive is required. a peak current of 130% facilitates the activation of main circuits. order code output power max. output voltage output current effciency max. peak 1) tmps 05-103 5 w 3.3 vdc 1515 ma 1970 ma 74 % tmps 05-105 5.0 vdc 1000 ma 1300 ma 80 % tmps 05-109 9.0 vdc 555 ma 721 ma 82 % tmps 05-112 12 vdc 416 ma 540 ma 82 % tmps 05-115 15 vdc 333 ma 433 ma 83 % tmps 05-124 24 vdc 208 ma 270 ma 83 % tmps 05-148 48 vdc 104 ma 135 ma 85 % models pcb power module in 1" x 1" package certifed to en60335-1 for household appliance. no load input power <300 mw to comply with erp directive operating temperature range C25c to +70c emi meets en 55022 class b and en 55014-1 protection class ii prepared 3-year product warranty c b scheme u l 60950 -1 1) < 30 s with maximum duty cycle of 10%, average output power must not exceed 5 w http://www.tracopower.com ac/dc power module tmps 05 series, 5 watt
page 2 of 3 input specifications input voltage ranges C ac input 85 C 264 vac C dc input 120 C 370 vdc input frequency 47 C 63 hz input current at full load (115 vac / 230 vac nominal input) 110 ma typ. no-load power consumption 300 mw max. output specifications voltage set accuracy 2 % max. minimum load no minimum load required ripple and noise (20 mhz bandwidth) 3.3 and 5 vdc models: 60 mvp-p max. other models: 1% mvp-p max. of nominal vout regulation C input variation 1 % max. C load variation 1 % max. hold-up time 8 ms typ. (at 115 vac and full load) 40 ms typ. (at 230 vac and full load) over voltage protection max. 190 % of nominal vout current limitation at 150 % typ. (autorecovery) (operation under over-load conditions may cause damage) short circuit protection hiccup, automatic recovery max. capacitive load 3.3 vdc model: 2200 f 5.0 vdc model: 1000 f 9.0 vdc model: 300 f 12 vdc model: 160 f 15 vdc model: 100 f 24 vdc model: 43 f 48 vdc model: 10 f general specifications temperature ranges C operating (20 lfm convection cooling) C25c to +70c C power derating above +50c 2.5 %/k C storage (non operating) C40c to +85c temperature coefficient 0.05 %/c humidity (non condensing) 95 % rel max. switching frequency (pulse width modulation pwm) 65 khz typ. isolation voltage C input/output 3000 vac isolation resistance (500 vdc) >100 mohm reliability /calculated mtbf (mil-hdbk-217f, at +25c, ground benign) tbd electromagnetic compatibility (emc), emissions C conducted and radiated input suppression en 55011/22, class b, fcc part 15, level b en 55014-1, electromagnetic compatibility en55014-2; en55024 (emc), immunity C electrostatic discharge esd iec / en 61000-4-2, 8 kv / 4kv criteria a C rf field immunity iec / en 61000-4-3, 10 v/m criteria a C electrical fast transients/burst immunity iec / en 61000-4-4, 2 kv dc criteria a C surge iec / en 61000-4-5, 1 kv/0.5kv criteria a C conducted rf iec / en 61000-4-6, 10 vrms criteria a C magnetic field immunity iec / en 61000-4-8, 30 a/m criteria a C voltage dip and interruptions iec / en 61000-4-11 30%, 10ms perf. criteria a 95%, 5000ms perf. criteria b tmps 05 series, 5 watt http://www.tracopower.com all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower.com www .tracopower. com page 3 of 3 outline dimensions pin 1 ac(n) 2 ac(l) 3 nc* 4 -vout 5 +vout pin-out general specifications (continued) protection class ii acording iec/en 60536 safety standards iec/en 60950-1, ul 60950-1 en 60335-1 safety approvals C certification documents (pending) www.tracopower.com/overview/tmps05 environmental compliance C reach (pending) www.tracopower.com/overview/tmps05 C rohs rohs directive 2011/65/eu physical specifications casing material plastic resin + fiberglass (ul 94v-0 rated) pin tinned copper weight 19.7 g (0.69 oz) 1 5.08 (0.20) ? 0.6 ( ? 0.02) 10.1 6 (0.40) 2 54 3 2.54 (0.10) 25.4 (1.00 ) 25.4 ( 1.00) 16.3 (0.64) 5.0 8 (0.20) 20.3 (0.80) 2.54 (0.10) 10.1 6 (0.40) 25.4 (1.00) dimensions in[mm], () = inches tolerances = 0.5mm (0.01) pin diameter ? 0.6 mm (0.02 0.004) *internally not connected but keep it isolated from primary circuit tmps 05 series, 5 watt rev. august 14. 2015


▲Up To Search▲   

 
Price & Availability of TMPS05-103

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X